Page 66 - Metro Glass Catalogue

HP2025 TEST RESULTS
TEST REPORT FOR METRO GLASS & ALUMINUM PRODUCTS LTD.
Report No.: 104394266COQ-001A
Date: 01/04/21
SECTION 7
TEST RESULTS
AIR LEAKAGE RESISTANCE
Air test data is indicated in the following table:
1500 Brigantine Drive Coquitlam, BC, V3K 7C1
Telephone: 604-520-3321 604-524-9186 www.intertek.com/building
Property
Overall Assembly @ 75 Pa
Overall Assembly @ 300 Pa
Area m2 (ft2)
4.00 (43.06)
Infiltration Rate L/s*m2 (cfm/ft2)
0.00 (0.00)
0.01 (0.00)
Allowable Leakage Rates
Exfiltration Rate L/s*m2 (cfm/ft2)
0.00 (0.00) 0.01 (0.00)
Compliance US (CAN)
Pass (Fixed) Pass (Fixed)
Maximum allowable air leakage rate (US): 1.5 L/s*m2, 0.3 cfm/ft2
Maximum allowable air leakage rate (CAN – Fixed): 0.2 L/s*m2, 0.04 cfm/ft2
The overall system met the US and Canadian performance requirements as reported above when evaluated under NAFS-17 and A440S1-19.
CYCLIC WATER PENETRATION RESISTANCE
During the 24-minute test period, using a pressure differential of 720 Pa (15.0 psf), there was no water leakage observed. The system met the (CAN) PG100 Water Penetration Resistance performance requirements under NAFS-17 and A440S1-19.
STATIC WATER PENETRATION RESISTANCE
During the 15-minute test period, using a pressure differential of 720 Pa (15.0 psf), there was no water leakage observed. The system met the (CAN) PG100 Water Penetration Resistance performance requirements under NAFS-17 and A440S1-19.
UNIFORM LOAD – DEFLECTION & STRUCTURAL
Fixed Combination Uniform Load Structural data: Mullion span, L = 2000 mm (78.74")
Deflection limit, L/175 = 11.43 mm (0.45”)
Residual deflection limit, L*0.3% = 6.00 mm (0.24")
Deflection Measurements, mm (in.)
Test Pressure, Pa (psf)
failure or permanent deformation of any part of the window system that would cause any operational malfunction. The system met the overall DP80 Uniform Load performance requirements under NAFS-17.
Version: 29 September 2020 Page 8 of 24 GFT-OP-10c
Positive
Negative
Compliance
Pass DP80
Deflection
Residual
0.78 (0.03)
Deflection
Residual
0.68 (0.03)
3840 (80.2) 5760 (120.3)
9.36 (0.37) n/a
8.87 (0.35) n/a
0.90 (0.04)
After the test loads were released, the specimen was inspected and there was found to be no
1.03 (0.04)
50 Years of Manufacturing Innovative Aluminum Doors, Frames, Curtain Walls, Windows and Vents
Bay 108 - 1626 115 Ave. N.E. Calgary, Alberta T3K 2E4 Phone: 403-250-9290 Fax: 403-291-0599 Toll Free: Phone: 1-877-919-0906 Fax: 1-877-919-0905
www.metroglass.ca